MindView Inc.
[ Viewing Hints ] [ Revision History ] [ Free Newsletter ]
[ Seminars ] [ Seminars on CD ROM ] [ Consulting ]

Thinking in C++, 2nd ed., Volume 2, Revision 3

©2000 by Bruce Eckel

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]

7: Exception handling

Improved error recovery is one of the most powerful ways you can increase the robustness of your code.
show how you can make several function calls with only one catch, thus greatly reducing the amount of error-handling code you must write.

Unfortunately, it’s almost accepted practice to ignore error conditions, as if we’re in a state of denial about errors. Some of the reason is no doubt the tediousness and code bloat of checking for many errors. For example, printf( ) returns the number of characters that were successfully printed, but virtually no one checks this value. The proliferation of code alone would be disgusting, not to mention the difficulty it would add in reading the code.

The problem with C’s approach to error handling could be thought of as one of coupling – the user of a function must tie the error-handling code so closely to that function that it becomes too ungainly and awkward to use.

One of the major features in C++ is exception handling, which is a better way of thinking about and handling errors. With exception handling,

  1. Error-handling code is not nearly so tedious to write, and it doesn't become mixed up with your "normal" code. You write the code you want to happen; later in a separate section you write the code to cope with the problems. If you make multiple calls to a function, you handle the errors from that function once, in one place.
  2. Errors cannot be ignored. If a function needs to send an error message to the caller of that function, it “throws” an object representing that error out of the function. If the caller doesn’t “catch” the error and handle it, it goes to the next enclosing scope, and so on until someone catches the error.

This chapter examines C’s approach to error handling (such as it is), why it did not work very well for C, and why it won’t work at all for C++. Then you’ll learn about try, throw, and catch, the C++ keywords that support exception handling.

Error handling in C

In most of the examples in this book, assert( ) was used as it was intended: for debugging during development with code that could be disabled with #define NDEBUG for the shipping product. Runtime error checking uses the require.h functions developed in Chapter XX. These were a convenient way to say, “There’s a problem here you’ll probably want to handle with some more sophisticated code, but you don’t need to be distracted by it in this example.” The require.h functions may be enough for small programs, but for complicated products you may need to write more sophisticated error-handling code.

Error handling is quite straightforward in situations where you check some condition and you know exactly what to do because you have all the necessary information in that context. Of course, you just handle the error at that point. These are ordinary errors and not the subject of this chapter.

The problem occurs when you don’t have enough information in that context, and you need to pass the error information into a larger context where that information does exist. There are three typical approaches in C to handle this situation.

  1. Return error information from the function or, if the return value cannot be used this way, set a global error condition flag. (Standard C provides errno

and perror( ) to support this.) As mentioned before, the programmer may simply ignore the error information because tedious and obfuscating error checking must occur with each function call. In addition, returning from a function that hits an exceptional condition may not make sense.

  1. Use the little-known Standard C library signal-handling system, implemented with the signal( 

) function (to determine what happens when the event occurs) and raise( ) (to generate an event). Again, this has high coupling because it requires the user of any library that generates signals to understand and install the appropriate signal-handling mechanism; also in large projects the signal numbers from different libraries may clash with each other.

  1. Use the nonlocal got

o functions in the Standard C library: setjmp( ) and longjmp( ). With setjmp( ) you save a known good state in the program, and if you get into trouble, longjmp( ) will restore that state. Again, there is high coupling between the place where the state is stored and the place where the error occurs.

When considering error-handling schemes with C++, there’s an additional very critical problem: The C techniques of signals and setjmp/longjmp do not call destructors, so objects aren’t properly cleaned up. This makes it virtually impossible to effectively recover from an exceptional condition because you’ll always leave objects behind that haven’t been cleaned up and that can no longer be accessed. The following example demonstrates this with setjmp/longjmp:

//: C07:Nonlocal.cpp
// setjmp() & longjmp()
#include <iostream>
#include <csetjmp>
using namespace std;

class Rainbow {
public:
  Rainbow() { cout << "Rainbow()" << endl; }
  ~Rainbow() { cout << "~Rainbow()" << endl; }
};

jmp_buf kansas;

void oz() {
  Rainbow rb;
  for(int i = 0; i < 3; i++)
    cout << "there's no place like home\n";
  longjmp(kansas, 47);
}

int main() {
  if(setjmp(kansas) == 0) {
    cout << "tornado, witch, munchkins...\n";
    oz();
  } else {
    cout << "Auntie Em! "
         << "I had the strangest dream..."
         << endl;
  }

} ///:~

setjmp( ) is an odd function because if you call it directly, it stores all the relevant information about the current processor state in the jmp_buf and returns zero. In that case it has the behavior of an ordinary function. However, if you call longjmp( ) using the same jmp_buf, it’s as if you’re returning from setjmp( ) again – you pop right out the back end of the setjmp( ). This time, the value returned is the second argument to longjmp( ), so you can detect that you’re actually coming back from a longjmp( ). You can imagine that with many different jmp_bufs, you could pop around to many different places in the program. The difference between a local goto (with a label) and this nonlocal goto is that you can go anywhere with setjmp/longjmp (with some restrictions not discussed here).

The problem with C++ is that longjmp( ) doesn’t respect objects; in particular it doesn’t call destructors when it jumps out of a scope.[23] Destructor calls are essential, so this approach won’t work with C++.

Throwing an exception

If you encounter an exceptional situation in your code – that is, one where you don’t have enough information in the current context to decide what to do – you can send information about the error into a larger context by creating an object containing that information and “throwing” it out of your current context. This is called throwing an exception. Here’s what it looks like:

throw myerror(“something bad happened”);

myerror is an ordinary class, which takes a char* as its argument. You can use any type when you throw (including built-in types), but often you’ll use special types created just for throwing exceptions.

The keyword throw causes a number of relatively magical things to happen. First it creates an object that isn’t there under normal program execution, and of course the constructor is called for that object. Then the object is, in effect, “returned” from the function, even though that object type isn’t normally what the function is designed to return. A simplistic way to think about exception handling is as an alternate return mechanism, although you get into trouble if you take the analogy too far – you can also exit from ordinary scopes by throwing an exception. But a value is returned, and the function or scope exits.

Any similarity to function returns ends there because where you return to is someplace completely different than for a normal function call. (You end up in an appropriate exception handler that may be miles away from where the exception was thrown.) In addition, only objects that were successfully created at the time of the exception are destroyed (unlike a normal function return that assumes all the objects in the scope must be destroyed). Of course, the exception object itself is also properly cleaned up at the appropriate point.

In addition, you can throw as many different types of objects as you want. Typically, you’ll throw a different type for each different type of error. The idea is to store the information in the object and the type of object, so someone in the bigger context can figure out what to do with your exception.

Catching an exception

If a function throws an exception, it must assume that exception is caught and dealt with. As mentioned before, one of the advantages of C++ exception handling is that it allows you to concentrate on the problem you’re actually trying to solve in one place, and then deal with the errors from that code in another place.

The try block

If you’re inside a function and you throw an exception (or a called function throws an exception), that function will exit in the process of throwing. If you don’t want a throw to leave a function, you can set up a special block within the function where you try to solve your actual programming problem (and potentially generate exceptions). This is called the try block because you try your various function calls there. The try block is an ordinary scope, preceded by the keyword try:

try {
  // Code that may generate exceptions

}

If you were carefully checking for errors without using exception handling, you’d have to surround every function call with setup and test code, even if you call the same function several times. With exception handling, you put everything in a try block without error checking. This means your code is a lot easier to write and easier to read because the goal of the code is not confused with the error checking.

Exception handlers

Of course, the thrown exception must end up someplace. This is the exception handler, and there’s one for every exception type you want to catch. Exception handlers immediately follow the try block and are denoted by the keyword catch:

try {
// code that may generate exceptions
} catch(type1 id1) {
  // handle exceptions of type1
} catch(type2 id2) {
  // handle exceptions of type2
}

// etc...

Each catch clause (exception handler) is like a little function that takes a single argument of one particular type. The identifier (id1, id2, and so on) may be used inside the handler, just like a function argument, although sometimes there is no identifier because it’s not needed in the handler – the exception type gives you enough information to deal with it.

The handlers must appear directly after the try block. If an exception is thrown, the exception-handling mechanism goes hunting for the first handler with an argument that matches the type of the exception. Then it enters that catch clause, and the exception is considered handled. (The search for handlers stops once the catch clause is finished.) Only the matching catch clause executes; it’s not like a switch statement where you need a break after each case to prevent the remaining ones from executing.

Notice that, within the try block, a number of different function calls might generate the same exception, but you only need one handler.

Termination vs. resumption

There are two basic models in exception-handling theory. In termination (which is what C++ supports) you assume the error is so critical there’s no way to get back to where the exception occurred. Whoever threw the exception decided there was no way to salvage the situation, and they don’t want to come back.

The alternative is called resumption. It means the exception handler is expected to do something to rectify the situation, and then the faulting function is retried, presuming success the second time. If you want resumption, you still hope to continue execution after the exception is handled, so your exception is more like a function call – which is how you should set up situations in C++ where you want resumption-like behavior (that is, don’t throw an exception; call a function that fixes the problem). Alternatively, place your try block inside a while loop that keeps reentering the try block until the result is satisfactory.

Historically, programmers using operating systems that supported resumptive exception handling eventually ended up using termination-like code and skipping resumption. So although resumption sounds attractive at first, it seems it isn’t quite so useful in practice. One reason may be the distance that can occur between the exception and its handler; it’s one thing to terminate to a handler that’s far away, but to jump to that handler and then back again may be too conceptually difficult for large systems where the exception can be generated from many points.

The exception specification

You’re not required to inform the person using your function what exceptions you might throw. However, this is considered very uncivilized because it means he cannot be sure what code to write to catch all potential exceptions. Of course, if he has your source code, he can hunt through and look for throw statements, but very often a library doesn’t come with sources. C++ provides a syntax to allow you to politely tell the user what exceptions this function throws, so the user may handle them. This is the exception specification and it’s part of the function declaration, appearing after the argument list.

The exception specification reuses the keyword throw, followed by a parenthesized list of all the potential exception types. So your function declaration may look like

void f() throw(toobig, toosmall, divzero);

With exceptions, the traditional function declaration

void f();

means that any type of exception may be thrown from the function. If you say

void f() throw();

it means that no exceptions are thrown from a function.

For good coding policy, good documentation, and ease-of-use for the function caller, you should always use an exception specification when you write a function that throws exceptions.

unexpected( )

If your exception specification claims you’re going to throw a certain set of exceptions and then you throw something that isn’t in that set, what’s the penalty? The special function unexpected( ) is called when you throw something other than what appears in the exception specification.

set_unexpected( )

unexpected( ) is implemented with a pointer to a function, so you can change its behavior. You do so with a function called set_unexpected( ) which, like set_new_handler( ), takes the address of a function with no arguments and void return value. Also, it returns the previous value of the unexpected( ) pointer so you can save it and restore it later. To use set_unexpected( ), you must include the header file <exception>. Here’s an example that shows a simple use of all the features discussed so far in the chapter:

//: C07:Except.cpp
// Basic exceptions
// Exception specifications & unexpected()
#include <exception>
#include <iostream>
#include <cstdlib>
#include <cstring>
using namespace std;

class Up {};
class Fit {};
void g();

void f(int i) throw (Up, Fit) {
  switch(i) {
    case 1: throw Up();
    case 2: throw Fit();
  }
  g();
}

// void g() {} // Version 1
void g() { throw 47; } // Version 2
// (Can throw built-in types)

void my_unexpected() {
  cout << "unexpected exception thrown";
  exit(1);
}

int main() {
  set_unexpected(my_unexpected);
  // (ignores return value)
  for(int i = 1; i <=3; i++)
    try {
      f(i);
    } catch(Up) {
      cout << "Up caught" << endl;
    } catch(Fit) {
      cout << "Fit caught" << endl;
    }

} ///:~

The classes Up and Fit are created solely to throw as exceptions. Often exception classes will be this small, but sometimes they contain additional information so that the handlers can query them.

f( ) is a function that promises in its exception specification to throw only exceptions of type Up and Fit, and from looking at the function definition this seems plausible. Version one of g( ), called by f( ), doesn’t throw any exceptions so this is true. But then someone changes g( ) so it throws exceptions and the new g( ) is linked in with f( ). Now f( ) begins to throw a new exception, unbeknown to the creator of f( ). Thus the exception specification is violated.

The my_unexpected( ) function has no arguments or return value, following the proper form for a custom unexpected( ) function. It simply prints a message so you can see it has been called, then exits the program. Your new unexpected( ) function must not return (that is, you can write the code that way but it’s an error). However, it can throw another exception (you can even rethrow the same exception), or call exit( ) or abort( ). If unexpected( ) throws an exception, the search for the handler starts at the function call that threw the unexpected exception. (This behavior is unique to unexpected( ).)

Although the new_handler( ) function pointer can be null and the system will do something sensible, the unexpected( ) function pointer should never be null. The default value is terminate( ) (mentioned later), but whenever you use exceptions and specifications you should write your own unexpected( ) to log the error and either rethrow it, throw something new, or terminate the program.

In main( ), the try block is within a for loop so all the possibilities are exercised. Note that this is a way to achieve something like resumption – nest the try block inside a for, while, do, or if and cause any exceptions to attempt to repair the problem; then attempt the try block again.

Only the Up and Fit exceptions are caught because those are the only ones the programmer of f( ) said would be thrown. Version two of g( ) causes my_unexpected( ) to be called because f( ) then throws an int. (You can throw any type, including a built-in type.)

In the call to set_unexpected( ), the return value is ignored, but it can also be saved in a pointer to function and restored later.

Better exception specifications?

You may feel the existing exception specification rules aren’t very safe, and that

void f();

should mean that no exceptions are thrown from this function. If the programmer wants to throw any type of exception, you may think he or she should have to say

void f() throw(...); // Not in C++

This would surely be an improvement because function declarations would be more explicit. Unfortunately you can’t always know by looking at the code in a function whether an exception will be thrown – it could happen because of a memory allocation, for example. Worse, existing functions written before exception handling was introduced may find themselves inadvertently throwing exceptions because of the functions they call (which may be linked into new, exception-throwing versions). Thus, the ambiguity, so

void f();

means “Maybe I’ll throw an exception, maybe I won’t.” This ambiguity is necessary to avoid hindering code evolution.

Catching any exception

As mentioned, if your function has no exception specification, any type of exception can be thrown. One solution to this problem is to create a handler that catches any type of exception. You do this using the ellipses in the argument list (á la C):

catch(...) {
  cout << "an exception was thrown" << endl;

}

This will catch any exception, so you’ll want to put it at the end of your list of handlers to avoid pre-empting any that follow it.

The ellipses give you no possibility to have an argument or to know anything about the type of the exception. It’s a catch-all.

Rethrowing an exception

Sometimes you’ll want to rethrow the exception that you just caught, particularly when you use the ellipses to catch any exception because there’s no information available about the exception. This is accomplished by saying throw with no argument:

catch(...) {
  cout << "an exception was thrown" << endl;
  throw;

}

Any further catch clauses for the same try block are still ignored – the throw causes the exception to go to the exception handlers in the next-higher context. In addition, everything about the exception object is preserved, so the handler at the higher context that catches the specific exception type is able to extract all the information from that object.

Uncaught exceptions

If none of the exception handlers following a particular try block matches an exception, that exception moves to the next-higher context, that is, the function or try block surrounding the try block that failed to catch the exception. (The location of this higher-context try block is not always obvious at first glance.) This process continues until, at some level, a handler matches the exception. At that point, the exception is considered “caught,” and no further searching occurs.

If no handler at any level catches the exception, it is “uncaught” or “unhandled.” An uncaught exception also occurs if a new exception is thrown before an existing exception reaches its handler – the most common reason for this is that the constructor for the exception object itself causes a new exception.

terminate( )

If an exception is uncaught, the special function terminate( ) is automatically called. Like unexpected( ), terminate is actually a pointer to a function. Its default value is the Standard C library function abort( ), which immediately exits the program with no calls to the normal termination functions (which means that destructors for global and static objects might not be called).

No cleanups occur for an uncaught exception; that is, no destructors are called. If you don’t wrap your code (including, if necessary, all the code in main( )) in a try block followed by handlers and ending with a default handler (catch(...)) to catch all exceptions, then you will take your lumps. An uncaught exception should be thought of as a programming error.

set_terminate( )

You can install your own terminate( ) function using the standard set_terminate( ) function, which returns a pointer to the terminate( ) function you are replacing, so you can restore it later if you want. Your custom terminate( ) must take no arguments and have a void return value. In addition, any terminate( ) handler you install must not return or throw an exception, but instead must call some sort of program-termination function. If terminate( ) is called, it means the problem is unrecoverable.

Like unexpected( ), the terminate( ) function pointer should never be null.

Here’s an example showing the use of set_terminate( ). Here, the return value is saved and restored so the terminate( ) function can be used to help isolate the section of code where the uncaught exception is occurring:

//: C07:Terminator.cpp
// Use of set_terminate()
// Also shows uncaught exceptions
#include <exception>
#include <iostream>
#include <cstdlib>
using namespace std;

void terminator() {
  cout << "I'll be back!" << endl;
  abort();
}

void (*old_terminate)()
  = set_terminate(terminator);

class Botch {
public:
  class Fruit {};
  void f() {
    cout << "Botch::f()" << endl;
    throw Fruit();
  }
  ~Botch() { throw 'c'; }
};

int main() {
  try{
    Botch b;
    b.f();
  } catch(...) {
    cout << "inside catch(...)" << endl;
  }

} ///:~

The definition of old_terminate looks a bit confusing at first: It not only creates a pointer to a function, but it initializes that pointer to the return value of set_terminate( ). Even though you may be familiar with seeing a semicolon right after a pointer-to-function definition, it’s just another kind of variable and may be initialized when it is defined.

The class Botch not only throws an exception inside f( ), but also in its destructor. This is one of the situations that causes a call to terminate( ), as you can see in main( ). Even though the exception handler says catch(...), which would seem to catch everything and leave no cause for terminate( ) to be called, terminate( ) is called anyway, because in the process of cleaning up the objects on the stack to handle one exception, the Botch destructor is called, and that generates a second exception, forcing a call to terminate( ). Thus, a destructor that throws an exception or causes one to be thrown is a design error.

Function-level try blocks

//: C07:FunctionTryBlock.cpp
// Function-level try blocks
#include <iostream>
using namespace std;

int main() try {
    throw "main";
} catch(const char* msg) {
  cout << msg << endl;

} ///:~


Cleaning up

Part of the magic of exception handling is that you can pop from normal program flow into the appropriate exception handler. This wouldn’t be very useful, however, if things weren’t cleaned up properly as the exception was thrown. C++ exception handling guarantees that as you leave a scope, all objects in that scope whose constructors have been completed will have destructors called.

Here’s an example that demonstrates that constructors that aren’t completed don’t have the associated destructors called. It also shows what happens when an exception is thrown in the middle of the creation of an array of objects, and an unexpected( ) function that rethrows the unexpected exception:

//: C07:Cleanup.cpp
// Exceptions clean up objects
#include <fstream>
#include <exception>
#include <cstring>
using namespace std;
ofstream out("cleanup.out");

class Noisy {
  static int i;
  int objnum;
  static const int sz = 40;
  char name[sz];
public:
  Noisy(const char* nm="array elem") throw(int){
    objnum = i++;
    memset(name, 0, sz);
    strncpy(name, nm, sz - 1);
    out << "constructing Noisy " << objnum
      << " name [" << name << "]" << endl;
    if(objnum == 5) throw int(5);
    // Not in exception specification:
    if(*nm == 'z') throw char('z');
  }
  ~Noisy() {
    out << "destructing Noisy " << objnum
      << " name [" << name << "]" << endl;
  }
  void* operator new[](size_t sz) {
    out << "Noisy::new[]" << endl;
    return ::new char[sz];
  }
  void operator delete[](void* p) {
    out << "Noisy::delete[]" << endl;
    ::delete []p;
  }
};

int Noisy::i = 0;

void unexpected_rethrow() {
  out << "inside unexpected_rethrow()" << endl;
  throw; // Rethrow same exception
}

int main() {
  set_unexpected(unexpected_rethrow);
  try {
    Noisy n1("before array");
    // Throws exception:
    Noisy* array = new Noisy[7];
    Noisy n2("after array");
  } catch(int i) {
    out << "caught " << i << endl;
  }
  out << "testing unexpected:" << endl;
  try {
    Noisy n3("before unexpected");
    Noisy n4("z");
    Noisy n5("after unexpected");
  } catch(char c) {
    out << "caught " << c << endl;
  }

} ///:~

The class Noisy keeps track of objects so you can trace program progress. It keeps a count of the number of objects created with a static data member i, and the number of the particular object with objnum, and a character buffer called name to hold an identifier. This buffer is first set to zeroes. Then the constructor argument is copied in. (Note that a default argument string is used to indicate array elements, so this constructor also acts as a default constructor.) Because the Standard C library function strncpy( )stops copying after a null terminator or the number of characters specified by its third argument, the number of characters copied in is one minus the size of the buffer, so the last character is always zero, and a print statement will never run off the end of the buffer.

There are two cases where a throw can occur in the constructor. The first case happens if this is the fifth object created (not a real exception condition, but demonstrates an exception thrown during array construction). The type thrown is int, which is the type promised in the exception specification. The second case, also contrived, happens if the first character of the argument string is ‘z’, in which case a char is thrown. Because char is not listed in the exception specification, this will cause a call to unexpected( ).

The array versions of new and delete are overloaded for the class, so you can see when they’re called.

The function unexpected_rethrow( ) prints a message and rethrows the same exception. It is installed as the unexpected( ) function in the first line of main( ). Then some objects of type Noisy are created in a try block, but the array causes an exception to be thrown, so the object n2 is never created. You can see the results in the output of the program:

constructing Noisy 0 name [before array]
Noisy::new[]
constructing Noisy 1 name [array elem]
constructing Noisy 2 name [array elem]
constructing Noisy 3 name [array elem]
constructing Noisy 4 name [array elem]
constructing Noisy 5 name [array elem]
destructing Noisy 4 name [array elem]
destructing Noisy 3 name [array elem]
destructing Noisy 2 name [array elem]
destructing Noisy 1 name [array elem]
Noisy::delete[]
destructing Noisy 0 name [before array]
caught 5
testing unexpected:
constructing Noisy 6 name [before unexpected]
constructing Noisy 7 name [z]
inside unexpected_rethrow()
destructing Noisy 6 name [before unexpected]

caught z

Four array elements are successfully created, but in the middle of the constructor for the fifth one, an exception is thrown. Because the fifth constructor never completes, only the destructors for objects 1–4 are called.

The storage for the array is allocated separately with a single call to the global new. Notice that even though delete is never explicitly called anywhere in the program, the exception-handling system knows it must call delete to properly release the storage. This behavior happens only with “normal” versions of operator new. If you use the placement syntax described in Chapter XX, the exception-handling mechanism will not call delete for that object because then it might release memory that was not allocated on the heap.

Finally, object n1 is destroyed, but not object n2 because it was never created.

In the section testing unexpected_rethrow( ), the n3 object is created, and the constructor of n4 is begun. But before it can complete, an exception is thrown. This exception is of type char, which violates the exception specification, so the unexpected( ) function is called (which is unexpected_rethrow( ), in this case). This rethrows the same exception, which is expected this time, because unexpected_rethrow( ) can throw any type of exception. The search begins right after the constructor for n4, and the char exception handler catches it (after destroying n3, the only successfully created object). Thus, the effect of unexpected_rethrow( ) is to take any unexpected exception and make it expected; used this way it provides a filter to allow you to track the appearance of unexpected exceptions and pass them through.

Constructors

When writing code with exceptions, it’s particularly important that you always be asking, “If an exception occurs, will this be properly cleaned up?” Most of the time you’re fairly safe, but in constructors there’s a problem: If an exception is thrown before a constructor is completed, the associated destructor will not be called for that object. This means you must be especially diligent while writing your constructor.

The general difficulty is allocating resources in constructors. If an exception occurs in the constructor, the destructor doesn’t get a chance to deallocate the resource. This problem occurs most often with “naked” pointers. For example,

//: C07:Nudep.cpp
// Naked pointers
#include <fstream>
#include <cstdlib>
using namespace std;
ofstream out("nudep.out");

class Cat {
public:
  Cat() { out << "Cat()" << endl; }
  ~Cat() { out << "~Cat()" << endl; }
};

class Dog {
public:
  void* operator new(size_t sz) {
    out << "allocating a Dog" << endl;
    throw int(47);
  }
  void operator delete(void* p) {
    out << "deallocating a Dog" << endl;
    ::delete p;
  }
};

class UseResources {
  Cat* bp;
  Dog* op;
public:
  UseResources(int count = 1) {
    out << "UseResources()" << endl;
    bp = new Cat[count];
    op = new Dog;
  }
  ~UseResources() {
    out << "~UseResources()" << endl;
    delete []bp; // Array delete
    delete op;
  }
};

int main() {
  try {
    UseResources ur(3);
  } catch(int) {
    out << "inside handler" << endl;
  }

} ///:~

The output is the following:

UseResources()
Cat()
Cat()
Cat()
allocating a Dog

inside handler

The UseResources constructor is entered, and the Cat constructor is successfully completed for the array objects. However, inside Dog::operator new, an exception is thrown (as an example of an out-of-memory error). Suddenly, you end up inside the handler, without the UseResources destructor being called. This is correct because the UseResources constructor was unable to finish, but it means the Cat object that was successfully created on the heap is never destroyed.

Making everything an object

To prevent this, guard against these “raw” resource allocations by placing the allocations inside their own objects with their own constructors and destructors. This way, each allocation becomes atomic, as an object, and if it fails, the other resource allocation objects are properly cleaned up. Templates are an excellent way to modify the above example:

//: C07:Wrapped.cpp
// Safe, atomic pointers
#include <fstream>
#include <cstdlib>
using namespace std;
ofstream out("wrapped.out");

// Simplified. Yours may have other arguments.
template<class T, int sz = 1> class PWrap {
  T* ptr;
public:
  class RangeError {}; // Exception class
  PWrap() {
    ptr = new T[sz];
    out << "PWrap constructor" << endl;
  }
  ~PWrap() {
    delete []ptr;
    out << "PWrap destructor" << endl;
  }
  T& operator[](int i) throw(RangeError) {
    if(i >= 0 && i < sz) return ptr[i];
    throw RangeError();
  }
};

class Cat {
public:
  Cat() { out << "Cat()" << endl; }
  ~Cat() { out << "~Cat()" << endl; }
  void g() {}
};

class Dog {
public:
  void* operator new[](size_t sz) {
    out << "allocating an Dog" << endl;
    throw int(47);
  }
  void operator delete[](void* p) {
    out << "deallocating an Dog" << endl;
    ::delete p;
  }
};

class UseResources {
  PWrap<Cat, 3> Bonk;
  PWrap<Dog> Og;
public:
  UseResources() : Bonk(), Og() {
    out << "UseResources()" << endl;
  }
  ~UseResources() {
    out << "~UseResources()" << endl;
  }
  void f() { Bonk[1].g(); }
};

int main() {
  try {
    UseResources ur;
  } catch(int) {
    out << "inside handler" << endl;
  } catch(...) {
    out << "inside catch(...)" << endl;
  }

} ///:~

The difference is the use of the template to wrap the pointers and make them into objects. The constructors for these objects are called before the body of the UseResources constructor, and any of these constructors that complete before an exception is thrown will have their associated destructors called.

The PWrap template shows a more typical use of exceptions than you’ve seen so far: A nested class called RangeError is created to use in operator[ ] if its argument is out of range. Because operator[ ] returns a reference it cannot return zero. (There are no null references.) This is a true exceptional condition – you don’t know what to do in the current context, and you can’t return an improbable value. In this example, RangeError is very simple and assumes all the necessary information is in the class name, but you may also want to add a member that contains the value of the index, if that is useful.

Now the output is

Cat()
Cat()
Cat()
PWrap constructor
allocating a Dog
~Cat()
~Cat()
~Cat()
PWrap destructor

inside handler

Again, the storage allocation for Dog throws an exception, but this time the array of Cat objects is properly cleaned up, so there is no memory leak.

Exception matching

When an exception is thrown, the exception-handling system looks through the “nearest” handlers in the order they are written. When it finds a match, the exception is considered handled, and no further searching occurs.

Matching an exception doesn’t require a perfect match between the exception and its handler. An object or reference to a derived-class object will match a handler for the base class. (However, if the handler is for an object rather than a reference, the exception object is “sliced” as it is passed to the handler; this does no damage but loses all the derived-type information.) If a pointer is thrown, standard pointer conversions are used to match the exception. However, no automatic type conversions are used to convert one exception type to another in the process of matching. For example,

//: C07:Autoexcp.cpp
// No matching conversions
#include <iostream>
using namespace std;

class Except1 {};
class Except2 {
public:
  Except2(Except1&) {}
};

void f() { throw Except1(); }

int main() {
  try { f();
  } catch (Except2) {
    cout << "inside catch(Except2)" << endl;
  } catch (Except1) {
    cout << "inside catch(Except1)" << endl;
  }

} ///:~

Even though you might think the first handler could be used by converting an Except1 object into an Except2 using the constructor conversion, the system will not perform such a conversion during exception handling, and you’ll end up at the Except1 handler.

The following example shows how a base-class handler can catch a derived-class exception:

//: C07:Basexcpt.cpp
// Exception hierarchies
#include <iostream>
using namespace std;

class X {
public:
  class Trouble {};
  class Small : public Trouble {};
  class Big : public Trouble {};
  void f() { throw Big(); }
};

int main() {
  X x;
  try {
    x.f();
  } catch(X::Trouble) {
    cout << "caught Trouble" << endl;
  // Hidden by previous handler:
  } catch(X::Small) {
    cout << "caught Small Trouble" << endl;
  } catch(X::Big) {
    cout << "caught Big Trouble" << endl;
  }

} ///:~

Here, the exception-handling mechanism will always match a Trouble object, or anything derived from Trouble, to the first handler. That means the second and third handlers are never called because the first one captures them all. It makes more sense to catch the derived types first and put the base type at the end to catch anything less specific (or a derived class introduced later in the development cycle).

In addition, if Small and Big represent larger objects than the base class Trouble (which is often true because you regularly add data members to derived classes), then those objects are sliced to fit into the first handler. Of course, in this example it isn’t important because there are no additional members in the derived classes and there are no argument identifiers in the handlers anyway. You’ll usually want to use reference arguments rather than objects in your handlers to avoid slicing off information.

Standard exceptions

The set of exceptions used with the Standard C++ library are also available for your own use. Generally it’s easier and faster to start with a standard exception class than to try to define your own. If the standard class doesn’t do what you need, you can derive from it.

The following tables describe the standard exceptions:

exception

The base class for all the exceptions thrown by the C++ standard library. You can ask what( ) and get a result that can be displayed as a character representation.

logic_error

Derived from exception. Reports program logic errors, which could presumably be detected before the program executes.

runtime_error

Derived from exception. Reports runtime errors, which can presumably be detected only when the program executes.

The iostream exception class ios::failure is also derived from exception, but it has no further subclasses.

The classes in both of the following tables can be used as they are, or they can act as base classes to derive your own more specific types of exceptions.

Exception classes derived from logic_error

domain_error

Reports violations of a precondition.

invalid_argument

Indicates an invalid argument to the function it’s thrown from.

length_error

Indicates an attempt to produce an object whose length is greater than or equal to NPOS (the largest representable value of type size_t).

out_of_range

Reports an out-of-range argument.

bad_cast

Thrown for executing an invalid dynamic_cast expression in run-time type identification (see Chapter XX).

bad_typeid

Reports a null pointer p in an expression typeid(*p). (Again, a run-time type identification feature in Chapter XX).

Exception classes derived from runtime_error

range_error

Reports violation of a postcondition.

overflow_error

Reports an arithmetic overflow.

bad_alloc

Reports a failure to allocate storage.


Programming with exceptions

For most programmers, especially C programmers, exceptions are not available in their existing language and take a bit of adjustment. Here are some guidelines for programming with exceptions.

When to avoid exceptions

Exceptions aren’t the answer to all problems. In fact, if you simply go looking for something to pound with your new hammer, you’ll cause trouble. The following sections point out situations where exceptions are not warranted.

Not for asynchronous events

The Standard C signal( ) system, and any similar system, handles asynchronous events: events that happen outside the scope of the program, and thus events the program cannot anticipate. C++ exceptions cannot be used to handle asynchronous events because the exception and its handler are on the same call stack. That is, exceptions rely on scoping, whereas asynchronous events must be handled by completely separate code that is not part of the normal program flow (typically, interrupt service routines or event loops).

This is not to say that asynchronous events cannot be associated with exceptions. But the interrupt handler should do its job as quickly as possible and then return. Later, at some well-defined point in the program, an exception might be thrown based on the interrupt.

Not for ordinary error conditions

If you have enough information to handle an error, it’s not an exception. You should take care of it in the current context rather than throwing an exception to a larger context.

Also, C++ exceptions are not thrown for machine-level events like divide-by-zero. It’s assumed these are dealt with by some other mechanism, like the operating system or hardware. That way, C++ exceptions can be reasonably efficient, and their use is isolated to program-level exceptional conditions.

Not for flow-of-control

An exception looks somewhat like an alternate return mechanism and somewhat like a switch statement, so you can be tempted to use them for other than their original intent. This is a bad idea, partly because the exception-handling system is significantly less efficient than normal program execution; exceptions are a rare event, so the normal program shouldn’t pay for them. Also, exceptions from anything other than error conditions are quite confusing to the user of your class or function.

You’re not forced to use exceptions

Some programs are quite simple, many utilities, for example. You may only need to take input and perform some processing. In these programs you might attempt to allocate memory and fail, or try to open a file and fail, and so on. It is acceptable in these programs to use assert( ) or to print a message and abort( ) the program, allowing the system to clean up the mess, rather than to work very hard to catch all exceptions and recover all the resources yourself. Basically, if you don’t need to use exceptions, you don’t have to.

New exceptions, old code

Another situation that arises is the modification of an existing program that doesn’t use exceptions. You may introduce a library that does use exceptions and wonder if you need to modify all your code throughout the program. Assuming you have an acceptable error-handling scheme already in place, the most sensible thing to do here is surround the largest block that uses the new library (this may be all the code in main( )) with a try block, followed by a catch(...) and basic error message. You can refine this to whatever degree necessary by adding more specific handlers, but, in any case, the code you’re forced to add can be minimal.

You can also isolate your exception-generating code in a try block and write handlers to convert the exceptions into your existing error-handling scheme.

It’s truly important to think about exceptions when you’re creating a library for someone else to use, and you can’t know how they need to respond to critical error conditions.

Typical uses of exceptions

Do use exceptions to

  1. Fix the problem and call the function (which caused the exception) again.
  2. Patch things up and continue without retrying the function.
  3. Calculate some alternative result instead of what the function was supposed to produce.
  4. Do whatever you can in the current context and rethrow the same exception to a higher context.
  5. Do whatever you can in the current context and throw a different exception to a higher context.
  6. Terminate the program.
  7. Wrap functions (especially C library functions) that use ordinary error schemes so they produce exceptions instead.
  8. Simplify. If your exception scheme makes things more complicated, then it is painful and annoying to use.
  9. Make your library and program safer. This is a short-term investment (for debugging) and a long-term investment (for application robustness).

Always use exception specifications

The exception specification is like a function prototype: It tells the user to write exception-handling code and what exceptions to handle. It tells the compiler the exceptions that may come out of this function.

Of course, you can’t always anticipate by looking at the code what exceptions will arise from a particular function. Sometimes the functions it calls produce an unexpected exception, and sometimes an old function that didn’t throw an exception is replaced with a new one that does, and you’ll get a call to unexpected( ). Anytime you use exception specifications or call functions that do, you should create your own unexpected( ) function that logs a message and rethrows the same exception.

Start with standard exceptions

Check out the Standard C++ library exceptions before creating your own. If a standard exception does what you need, chances are it’s a lot easier for your user to understand and handle.

If the exception type you want isn’t part of the standard library, try to derive one from an existing standard exception. It’s nice for your users if they can always write their code to expect the what( ) function defined in the exception( ) class interface.

Nest your own exceptions

If you create exceptions for your particular class, it’s a very good idea to nest the exception classes inside your class to provide a clear message to the reader that this exception is used only for your class. In addition, it prevents the pollution of the namespace.

You can nest your exceptions even if you’re deriving them from C++ standard exceptions.

Use exception hierarchies

Exception hierarchies provide a valuable way to classify the different types of critical errors that may be encountered with your class or library. This gives helpful information to users, assists them in organizing their code, and gives them the option of ignoring all the specific types of exceptions and just catching the base-class type. Also, any exceptions added later by inheriting from the same base class will not force all existing code to be rewritten – the base-class handler will catch the new exception.

Of course, the Standard C++ exceptions are a good example of an exception hierarchy, and one that you can use to build upon.

Multiple inheritance

You’ll remember from Chapter XX that the only essential place for MI is if you need to upcast a pointer to your object into two different base classes – that is, if you need polymorphic behavior with both of those base classes. It turns out that exception hierarchies are a useful place for multiple inheritance because a base-class handler from any of the roots of the multiply inherited exception class can handle the exception.

Catch by reference, not by value

If you throw an object of a derived class and it is caught by value in a handler for an object of the base class, that object is “sliced” – that is, the derived-class elements are cut off and you’ll end up with the base-class object being passed. Chances are this is not what you want because the object will behave like a base-class object and not the derived class object it really is (or rather, was – before it was sliced). Here’s an example:

//: C07:Catchref.cpp
// Why catch by reference?
#include <iostream>
using namespace std;

class Base {
public:
  virtual void what() {
    cout << "Base" << endl;
  }
};

class Derived : public Base {
public:
  void what() {
    cout << "Derived" << endl;
  }
};

void f() { throw Derived(); }

int main() {
  try {
    f();
  } catch(Base b) {
    b.what();
  }
  try {
    f();
  } catch(Base& b) {
    b.what();
  }

} ///:~

The output is

Base

Derived

because, when the object is caught by value, it is turned into a Base object (by the copy-constructor) and must behave that way in all situations, whereas when it’s caught by reference, only the address is passed and the object isn’t truncated, so it behaves like what it really is, a Derived in this case.

Although you can also throw and catch pointers, by doing so you introduce more coupling – the thrower and the catcher must agree on how the exception object is allocated and cleaned up. This is a problem because the exception itself may have occurred from heap exhaustion. If you throw exception objects, the exception-handling system takes care of all storage.

Throw exceptions in constructors

Because a constructor has no return value, you’ve previously had two choices to report an error during construction:

  1. Set a nonlocal flag and hope the user checks it.
  2. Return an incompletely created object and hope the user checks it.

This is a serious problem because C programmers have come to rely on an implied guarantee that object creation is always successful, which is not unreasonable in C where types are so primitive. But continuing execution after construction fails in a C++ program is a guaranteed disaster, so constructors are one of the most important places to throw exceptions – now you have a safe, effective way to handle constructor errors. However, you must also pay attention to pointers inside objects and the way cleanup occurs when an exception is thrown inside a constructor.

Don’t cause exceptions in destructors

Because destructors are called in the process of throwing other exceptions, you’ll never want to throw an exception in a destructor or cause another exception to be thrown by some action you perform in the destructor. If this happens, it means that a new exception may be thrown before the catch-clause for an existing exception is reached, which will cause a call to terminate( ).

This means that if you call any functions inside a destructor that may throw exceptions, those calls should be within a try block in the destructor, and the destructor must handle all exceptions itself. None must escape from the destructor.

Avoid naked pointers

See Wrapped.cpp. A naked pointer usually means vulnerability in the constructor if resources are allocated for that pointer. A pointer doesn’t have a destructor, so those resources won’t be released if an exception is thrown in the constructor.

Overhead

Of course it costs something for this new feature; when an exception is thrown there’s considerable runtime overhead. This is the reason you never want to use exceptions as part of your normal flow-of-control, no matter how tempting and clever it may seem. Exceptions should occur only rarely, so the overhead is piled on the exception and not on the normally executing code. One of the important design goals for exception handling was that it could be implemented with no impact on execution speed when it wasn’t used; that is, as long as you don’t throw an exception, your code runs as fast as it would without exception handling. Whether or not this is actually true depends on the particular compiler implementation you’re using.

Exception handling also causes extra information to be put on the stack by the compiler, to aid in stack unwinding.

Exception objects are properly passed around like any other objects, except that they can be passed into and out of what can be thought of as a special “exception scope” (which may just be the global scope). That’s how they go from one place to another. When the exception handler is finished, the exception objects are properly destroyed.

Summary

Error recovery is a fundamental concern for every program you write, and it’s especially important in C++, where one of the goals is to create program components for others to use. To create a robust system, each component must be robust.

The goals for exception handling in C++ are to simplify the creation of large, reliable programs using less code than currently possible, with more confidence that your application doesn’t have an unhandled error. This is accomplished with little or no performance penalty, and with low impact on existing code.

Basic exceptions are not terribly difficult to learn, and you should begin using them in your programs as soon as you can. Exceptions are one of those features that provide immediate and significant benefits to your project.

Exercises

  1. Create a class with member functions that throw exceptions. Within this class, make a nested class to use as an exception object. It takes a single char* as its argument; this represents a description string. Create a member function that throws this exception. (State this in the function’s exception specification.) Write a try block that calls this function and a catch clause that handles the exception by printing out its description string.
  2. Rewrite the Stash class from Chapter XX so it throws out-of-range exceptions for operator[].
  3. Write a generic main( ) that takes all exceptions and reports them as errors.
  4. Create a class with its own operator new. This operator should allocate 10 objects, and on the 11th “run out of memory” and throw an exception. Also add a static member function that reclaims this memory. Now create a main( ) with a try block and a catch clause that calls the memory-restoration routine. Put these inside a while loop, to demonstrate recovering from an exception and continuing execution.
  5. Create a destructor that throws an exception, and write code to prove to yourself that this is a bad idea by showing that if a new exception is thrown before the handler for the existing one is reached, terminate( ) is called.
  6. Prove to yourself that all exception objects (the ones that are thrown) are properly destroyed.
  7. Prove to yourself that if you create an exception object on the heap and throw the pointer to that object, it will not be cleaned up.
  8. (Advanced). Track the creation and passing of an exception using a class with a constructor and copy-constructor that announce themselves and provide as much information as possible about how the object is being created (and in the case of the copy-constructor, what object it’s being created from). Set up an interesting situation, throw an object of your new type, and analyze the result.

[23] You may be surprised when you run the example – some C++ compilers have extended longjmp( ) to clean up objects on the stack. This is nonportable behavior.

[ Previous Chapter ] [ Short TOC ] [ Table of Contents ] [ Index ] [ Next Chapter ]
Last Update:05/23/2000